RO Installation Cost, Requirements & Shifting — Samastipur and Nalanda
Installing an RO takes one to two hours, but a good installation depends on what is ready before the technician arrives. Here is the cost, the checklist and the mistakes that cause leaks and poor flow later.
Need an RO installed or shifted?
Call 7903760419 or WhatsApp us. See the full service page: RO Repair in Samastipur.
Typical Cost
| Service | Typical cost |
|---|---|
| New RO installation (wall mount) | ₹500 – ₹900 |
| Uninstall and shift to a new place | ₹400 – ₹700 |
| Inspection if you are unsure first | ₹99 (adjusted if you proceed) |
Indicative rates; extra pipe, fittings or a longer drain run can change the price and are quoted first.
Have These Ready
Wall space and height
A solid wall at a comfortable height, with room to open the filter housings later.
Before the visitPower point
A working socket within reach of the cable, away from where water can splash.
Before the visitWater inlet
A tap or pipe outlet nearby with a standard fitting, and a closing valve.
Before the visitDrain point
A sink or drain within reach for the waste-water line.
Before the visitAfter Installation
Run the first tank and discard it to flush the new filters. Check every joint for drips after an hour and again the next day. Note the tap and output TDS readings so you can track the membrane later. If you are still choosing a purifier, see our guide on UV, UF and RO for Bihar water first.
Frequently Asked Questions
How long does installation take?
Usually one to two hours depending on the layout.
Do you install RO units I bought elsewhere?
Yes, we install purifiers you have already bought. We are an independent service provider.
Can you shift my RO to a new house?
Yes — uninstall, move and reinstall, typically ₹400–₹700 plus any new fittings.
Is there a charge outside Biharsharif town?
A small travel charge may apply for outer Nalanda blocks and is confirmed before the visit.
Book RO Installation or Shifting
Same or next-day visit · Clear quote first