RO Not Giving Water or Very Slow Flow? Causes & Fix
When an RO stops giving water, the cause is usually one of a handful of things. Some you can check safely in two minutes; the rest need a meter and a technician. Here is how to tell them apart.
RO not giving water? We can trace it in one visit.
Call 7903760419 or WhatsApp us. See the full service page: RO Repair in Samastipur.
Safe Checks Before You Call
Inlet tap and supply
Make sure the water supply to the RO is on, the inlet valve is open and the pipe is not kinked or pressed behind the unit.
Signs: No water at the inlet at all.
FreeCan try yourselfStorage tank full or not
If the tank is already full, the RO correctly stops. Draw some water and see if it restarts.
Signs: RO silent after you have used no water.
FreeCan try yourselfPower light and plug
Check the power light, plug and socket. Always unplug before touching anything else.
Signs: No lights, no sound.
FreeCan try yourselfCauses That Need a Technician
Choked sediment filter
The most common cause on borewell water. Flow drops gradually, then the tank barely fills.
Signs: Slow filling over weeks.
₹100 – ₹250Weak booster pump or adapter
The pump hums but builds no pressure, or the adapter has failed and the pump does not run.
Signs: Buzzing sound, no output.
₹350 – ₹1,500Choked membrane
A scaled membrane passes very little water and sends more to drain.
Signs: High drain flow, low purified output, salty taste.
₹900 – ₹2,200Low air pressure in the storage tank
Many ROs rely on pressure in the storage tank to push water to the tap. If it is low, the tap delivers a trickle even though the tank is full.
Signs: Tank feels full but the tap runs slowly.
Quick fixDo not open the pump or the electrical box yourself. If you are unsure, switch off, unplug and call us.
Frequently Asked Questions
Why is my RO tank not filling?
Usually a choked sediment filter, weak pump or adapter, or a choked membrane. A technician can tell which with a pressure and flow check.
Is low inlet water pressure a problem?
Yes. ROs need adequate pressure at the inlet; a booster pump compensates, but a failing pump or very low supply pressure will cut output.
How much does it cost to fix?
Often ₹150–₹500 for filter or adapter faults, more if the pump or membrane is replaced. You get a quote before anything changes.
Do you cover Nalanda too?
Yes — see our RO page for Nalanda and Biharsharif.
RO Still Not Giving Water? We Will Trace the Fault
Inspection ₹99 · Same day in Samastipur · 30-Day Warranty